Product search



PET MATT SILVER TC 50 / RC15 / HD 70ZC/RC15/286415788093696

Download as pdf

Date07.05.2019 SI
ProductPET MATT SILVER TC 50 / RC15 / HD 70
Sales CodeZC/RC15/28
Product useProduct designed for durable labelling applications on surfaces such as steel, glass and ABS. It will perform for the lifetime of the labelled product with very good adhesion and good print resistance against chemicals, UV-light, heat and moisture. This product is less prone to dusting than equivalent matt films.
Typical technical values
ProductSilver, matt top-coated polyester film.
Substance71g/m²DIN 53352
Caliper51µmDIN 53370
PrintabilitySuitable for flexography, screen and offset printing methods. Special inks designed for non-absorbent materials should be used. Thermal transfer possible with selected wax-resin and resin ribbons.
TypeClear permanent adhesive.
CompositionRadiation-cured UV-Acrylic.
Tack20N/25mmFTM 9(on glass)
Peel 180°25N/25mmFTM 1(on glass)
Regulatory infoThe adhesive RC15 is in compliance with the demands of the Code of Federal Regulations, Food and Drug Administration (FDA) , 21 CFR Ch. I (April 1, 2012 edition) § 175.105 and § 175.125.
BackingHD 70
ProductA white transparent glassine backing paper.
Substance60g/m²ISO 536
Caliper53µmISO 534
Tensile strength MD6.6kN/mISO 1924
Tensile strength CD2.5kN/mISO 1924
Transparency50%DIN 53147
Total caliper128 µm
Minimum labelling temperature5 °C
Service temperature-40 °C to 150 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Adhesive coatweight23 g/m²
AdhesionDue to the fact that the adhesive needs a certain time to reach its final adhesion, we recommend waiting at least 24h (better 72h) after dispensing the label to the substrate before proceeding with any performance tests. Test Conditions: 23 °C, 50%RH FTM1 180º Peel Adhesion (300 mm/min) with 72 h dwell time.
Stainless Steel22
PA6 + GF3017
Lacquered panel13
Powder coated panel14
Chemical resistanceTest Conditions: Dwell time on glass plate: 24 h; 23°C 50% RH Immersion in chemical: 4 h; 23°C 50% RH
ChemicalVisual AppearanceEdge Penetration (mm)
Brake Fluidno change0
Engine Oilno change0
Dieselno change0
Distilled Waterno change0
Dish Washing Agentno change0
Bleachno change0
Thermal Transfer Ribbons(included in File MH26760) Armor AXR 600, AXR 7+, AXR 8; Astro-med RY; Dainippon R300, R510; Kurz K501; Ricoh B110C, B110CX, B120EC; Zebra Technologies Corp. 5100
UL and CSA complianceUL recognized acc. to UL969 and CSA recognized acc. to C22.2 No. 0.15. File-No.: MH26760
ULFile MH26760:
Application SurfaceMax Temp [°C]Min Temp [°C]Indoor UseOutdoor UseAdditional conditions
Acrylic Paint (AC PT)100-40xx
Alkyd paint (AK PT)150-40xx
Galvanized steel (GS)150-40xx
Polyester paint (PER PT)100-40xx
Stainless steel (SS)150-40xx
Phenolic-Phenol formaldehyde100-40xx
Polycarbonate (PC)100-40xx
Nylon - Polyamide (PA)80-40xx
Acrylonitrile butadiene styrene (ABS)60-40xx
Polystyrene (PS)80-40xx
Typical valuesThe listed technical data are typical values and give indications about the performance of the material only. They are not intended for specification purpose.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Product availability

ServiceWidth (mm) / Length (m)
Small roll1000/500

 Do you know our services?


 ‭(Hidden)‬ News

 ‭(Hidden)‬ Brochures

 ‭(Hidden)‬ Related materials