Product search




Download as pdf

Date17.09.2019 SI
ProductThermal Eco BPAFree-FSC / RR21 / Honey Glassine 65
Sales CodeBZE/RR21/03
Product useProduct designed for general purpose non topcoated direct thermal labels for retail, transport and logistics applications requiring removable adhesive.
Typical technical values
ProductA non-top coated paper with a high sensitivity thermal coating produced totally without BPA-based chemistry. This face paper is made from FSC ™-certified (mix credit) pulp. Limited resistance to thermal image scratching or smudging.
Substance71g/m²ISO 536
Caliper79µmISO 534
Tensile strength MD3.90kN/mISO 1924/2min
Tensile strength CD1.90kN/mISO 1924/2min
Brightness92%ISO 2470/3norm
Roughness1.9µmISO 8791PPS 10
Imaging colourBlack
ScanningVisible red light (wavelength up to 650 nm).
DT printing speedDirect thermal printing speed up to 300 mm/s.
Optical densityDirect thermal print 1.27 (min)
PrintabilitySuitable for direct thermal and water based flexography.
SustainabilityThe product is sold as FSC™ Mix Credit under UPM Raflatac's FSC certificate SGSCH-COC-004879.
TypeGeneral purpose removable adhesive.
CompositionRubber, water borne.
Tack5N/25mmFTM 9
Peel min2.0N/25mmFTM 290°
Peel max5.0N/25mmFTM 290°
ProductYellow transparent glassine backing paper.
Substance57g/m²ISO 536
Caliper51µmISO 534
Tensile strength MD6.2kN/mISO 1924
Tensile strength CD2.3kN/mISO 1924
Transparency49%DIN 53147
Total caliper142 µm
Minimum labelling temperature- 10 °C
Service temperature- 30 °C to 70 °C
Shelf lifeFrom date of manufacture: 12 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Product InformationGeneral purpose product for retail, transport and logistics applications. Designed for a wide range of applications where good long term removability is required. The product is not suitable for labelling of plasticised PVC and it has limited resistance in wet conditions.
ApprovalsFor food labeling applications, please consult your UPM Raflatac contact for the individual Declaration of Conformance (DoC) document of each product component for further compliance information.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Product availability

ServiceWidth (mm) / Length (m)

 Do you know our services?


 ‭(Hidden)‬ News

 ‭(Hidden)‬ Brochures

 ‭(Hidden)‬ Related materials