Product search

 

 

THERM TOP FOOD NXT+FSC / RH9X / HONEY GLASSINE 45-FSCHCG/RH9X/FUY6415788316559

Download as pdf

Date11.09.2019 SI
ProductTHERMAL TOP FOOD NXT+FSC / RH9X / HONEY GLASSINE 45-FSC
Sales CodeHCG/RH9X/FUY
EAN6415788316559
Product useProduct designed for pre-packed food labelling with good direct thermal printability and high initial adhesion in chill conditions. RAFNXT+ products combine a unique formula of sustainability credentials together with productivity benefits that will contribute to the profitability of your business.
Typical technical values
FaceThermal Top Food NXT+FSC
ProductA top coated paper with a standard sensitivity thermal coating produced without BPA. This paper is made from FSC™Mix Credit-certified pulp.
Substance67g/m²ISO 536
Caliper73µmISO 534
Roughness1.9µmISO 8791-4PPS 10
Tensile strength MD3.3kN/mISO 1924-3min
Tensile strength CD1.6kN/mISO 1924-3min
Brightness82%ISO 2470min
Imaging colourBlack
ScanningVisible red light (wavelength up to 650 nm).
DT printing speedDirect thermal printing speed up to 200 mm/s.
PrintabilitySuitable for direct thermal, UV- and water-based flexography, UV-letterpress.
SustainabilityThe product is sold as FSC™ Mix Credit under UPM Raflatac's FSC certificate SGSCH-COC-004879.
AdhesiveRH9X
TypeGeneral purpose permanent adhesive.
CompositionRubber, hotmelt.
Tack17N/25mmFTM 9
BackingHONEY GLASSINE 45-FSC
ProductYellow transparent glassine backing paper.
Substance48g/m²ISO 536
Caliper44µmISO 534
Tensile strength MD4.5kN/mISO 1924
Tensile strength CD1.8kN/mISO 1924
Transparency57%DIN 53147
SustainabilityThe product is sold as FSC™ Mix Credit under UPM Raflatac's FSC certificate SGSCH-COC-004879.
Performance
Total caliper134 µm
Minimum labelling temperature0 °C
Service temperature- 40°C to + 60°C
Shelf lifeFrom date of manufacture: 12 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Information
Product InformationDesigned for wide range of direct thermal printed applications including industrially pre-packed foodstuffs where good resistance to water and vegetable oils is required. Should be used when very good adhesion at low temperature is required. Very good adhesion to non-polar surfaces. Pre-printing and varnish layers decrease print head heat energy conductivity into thermal layer, consequently it is recommended not to pre-print/varnish label area which is meant for direct thermal printing.
Approvals
ApprovalsFor food labeling applications, please consult your UPM Raflatac contact for the individual Declaration of Conformance (DoC) document of each product component for further compliance information.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Product availability

ServiceWidth (mm) / Length (m)
Mega2000/2000
Mega2000/4000
Mega2000/6000
Stock2000/0

 Do you know our services?

 Components

 ‭(Hidden)‬ News

 ‭(Hidden)‬ Brochures

 ‭(Hidden)‬ Related materials