Product search

 

 

RAFLACOAT PLUS-FSC / RP48 / HONEY GLASSINE 65FLK/RP48/036415788243596

Download as pdf

Date06.05.2019 SI
ProductRAFLACOAT PLUS-FSC / RP48 / HONEY GLASSINE 65
Sales CodeFLK/RP48/03
EAN6415788243596
Product useProduct designed for chill and deep freeze food labelling applications. Suitable also for logistics labelling applications in case of the end user is looking for mid gloss appearance.
Typical technical values
FaceRAFLACOAT PLUS-FSC
ProductWhite woodfree machine coated mid-gloss paper.
Substance80g/m²ISO 536
Caliper70µmISO 534
Tensile strength MD5.8kN/mISO 1924/1
Tensile strength CD2.8kN/mISO 1924/1
Brightness90%ISO 2470/1
Roughness1.0µmISO 8791PPS 10
Opacity88%ISO 2471
Gloss64%Hunter 75°
CIE Whiteness120%ISO 11475
Stiffness MD0.23mNmISO/DP 2493
Stiffness CD0.13mNmISO/DP 2493
PrintabilitySuitable for flexography, offset, rotogravure, screen and hot foil. Suitable for thermal transfer printing with wax/resin ribbons. Testing recommended.
SustainabilityThe product is sold as FSC™ Mix Credit under UPM Raflatac's FSC certificate SGSCH-COC-004879.
AdhesiveRP48
TypeFreezer permanent adhesive.
CompositionAcrylic, water borne.
Tack12N/25mmFTM 9
BackingHONEY GLASSINE 65
ProductYellow transparent glassine backing paper.
Substance57g/m²ISO 536
Caliper51µmISO 534
Tensile strength MD6.2kN/mISO 1924
Tensile strength CD2.3kN/mISO 1924
Transparency49%DIN 53147
Performance
Total caliper138 µm
Minimum labelling temperature-20 °C
Service temperature-40 °C to 60 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Information
LimitationsLimited heat resistance. Should not be used in places where temperature is significantly above room temperature. Convertibility not as good as with other permanents. Edge-bleeding may occur. Not suitable for labelling curved surfaces. Limited adhesion to moist surfaces.
Product InformationShould be used when very good adhesion at low temperatures is required. Adhesion to non-polar surfaces is very good. Remains adherent at low temperatures
Approvals
Approvals and certificationsPlease see the individual Declaration of Conformance (DoC) document of each product component for further compliance information.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Product availability

ServiceWidth (mm) / Length (m)
Mega2000/2000
Mega2000/4000
Stock2000/0

 Do you know our services?

 Components

 ‭(Hidden)‬ News

 ‭(Hidden)‬ Brochures

 ‭(Hidden)‬ Related materials