Product search




Download as pdf

Date07.05.2019 SI
Sales CodeDEC/RH06/PPP
Product useProduct designed for general purpose labels for packed food and home care labelling applications in chill and ambient conditions. Construction is designed for high speed converting and dispensing where maximized liner strength and moisture resistance is needed. Proliner Plus allow more labels per reel, fewer reel changes and less down time.
Typical technical values
ProductWhite machine coated mid-gloss paper.
Substance70g/m²ISO 536
Caliper63µmISO 534
Tensile strength MD5.00kN/mISO 1924/2
Tensile strength CD2.10kN/mISO 1924/2
Brightness86%ISO 2470/1
Roughness1.1µmISO 8791PPS 10
Opacity87%ISO 2471
Gloss62%Hunter 75°
CIE Whiteness115%ISO 11475
Stiffness MD0.13mNmISO/DP 2493
Stiffness CD0.08mNmISO/DP 2493
PrintabilitySuitable for flexography, offset, rotogravure, screen and hot foil. Suitable for thermal transfer printing with wax/resin ribbons. Testing recommended. Non-optimized paper suitable for HP Indigo digital offset printing in some applications, print test recommended.
SustainabilityThe product is sold as FSC™ Mix Credit under UPM Raflatac's FSC certificate SGSCH-COC-004879.
TypePermanent adhesive.
CompositionRubber, hotmelt.
Tack15N/25mmFTM 9
BackingProLiner Plus
ProductClear polypropylene backing material.
Substance27g/m²ISO 536
Caliper30µmISO 534
Tensile strength MD200.0N/mm²DIN 53455
Tensile strength CD180.0N/mm²DIN 53455
Total caliper108 µm
Minimum labelling temperature0 °C
Service temperature-40 °C to 60 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
LimitationsUse on packaging with small diameter or test tubes might be restricted.
Product InformationDesigned for use in ambient and chill environment for typical product labelling in food and logistic. Provides good adhesion to non-polar surfaces.
Approvals and certificationsPlease see the individual Declaration of Conformance (DoC) document of each product component for further compliance information.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Product availability

ServiceWidth (mm) / Length (m)

 Do you know our services?


 ‭(Hidden)‬ News

 ‭(Hidden)‬ Brochures

 ‭(Hidden)‬ Related materials