Product search

 

 

THERMAL TOP P 180-FSC / RP51 / HONEY GLASSINE 65DZA/RP5X/036415788190692

Download as pdf

Date08.05.2019 SI
ProductTHERMAL TOP P 180-FSC / RP51 / HONEY GLASSINE 65
Sales CodeDZA/RP5X/03
EAN6415788190692
Product useProduct designed for general purpose topcoated direct thermal labels in retail and transport & logistics applications with good convertability, direct thermal printability and ambient temperature performance.
Typical technical values
FaceTHERMAL TOP P 180-FSC
ProductTop and reverse side barrier coated thermal paper with standard sensitivity produced totally without BPA-based chemistry. This face paper is made from FSC™-certified (mix credit) pulp.
Substance73g/m²ISO 536
Caliper72µmISO 534
Tensile strength MD4.70kN/mISO 1924/2min
Tensile strength CD2.30kN/mISO 1924/2min
Brightness93%ISO 2470/3
Imaging colourBlack
ScanningVisible red light (wavelength up to 650 nm).
Optical density1.20 min
PrintabilityDirect thermal. UV- and water-based flexography, letterpress, and UV-offset.
SustainabilityThe product is sold as FSC™ Mix Credit under UPM Raflatac's FSC certificate SGSCH-COC-004879.
AdhesiveRP51
TypeGeneral purpose permanent adhesive.
CompositionAcrylic, water borne.
Tack18N/25mmFTM 9
BackingHONEY GLASSINE 65
ProductYellow transparent glassine backing paper.
Substance57g/m²ISO 536
Caliper51µmISO 534
Tensile strength MD6.2kN/mISO 1924
Tensile strength CD2.3kN/mISO 1924
Transparency49%DIN 53147
Performance
Total caliper138 µm
Minimum labelling temperature0 °C
Service temperature- 20°C to 80°C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Information
Product InformationDesigned for wide range of information and product labelling requiring good environmental resistance. Good adhesion to all normal substrates including non-polar surfaces, films and corrugated boards. Good low temperature performance once labelled. Not suitable for labelling highly curved surfaces. Pre-printing and varnish layers decrease print head heat energy conductivity into thermal layer, consequently it is recommended not to pre-print/varnish label area which is meant for direct thermal printing.
Approvals
Approvals and certificationsFor food packaging applications, please contact your local sales representative for the individual Declaration of Conformance (DoC) document of each product component for further compliance information.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Product availability

ServiceWidth (mm) / Length (m)
Mega2000/2000
Mega2000/4000
Stock2000/0

 Do you know our services?

 Components

 ‭(Hidden)‬ News

 ‭(Hidden)‬ Brochures

 ‭(Hidden)‬ Related materials