Product search

 

 

PP CLEAR FTC 50 / 149DF / HD 70EYN/149D/286415788229415

Download as pdf

Date06.05.2019 SI
ProductPP CLEAR FTC 50 / 149DF / HD 70
Sales CodeEYN/149D/28
EAN6415788229415
Product useProduct designed for food applications where resistance to moisture is required even at deep freeze temperatures. This clear product can be used to enhance consumer´s perception and including good convertability properties.
Typical technical values
FacePP CLEAR FTC 50
ProductA transparent, glossy, biaxially oriented, top-coated polypropylene film.
Substance46g/m²internal
Caliper50µminternal
Tensile strength MD120MPainternal
Tensile strength CD270MPainternal
Gloss80%internal45°
PrintabilitySuitable for flexography, screen and offset printing methods. Thermal transfer is possible with selected wax-resin and resin ribbons.
Adhesive149DF
TypeFreezer permanent adhesive.
CompositionAcrylic, water borne.
Tack12N/25mmFTM 9
BackingHD 70
ProductA white transparent glassine backing paper.
Substance60g/m²ISO 536
Caliper53µmISO 534
Tensile strength MD6.6kN/mISO 1924
Tensile strength CD2.5kN/mISO 1924
Transparency50%DIN 53147
Performance
Total caliper125 µm
Minimum labelling temperature-20 °C
Service temperature-40 °C to 60 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Approvals
Approvals and certificationsFor food labeling applications, please consult your UPM Raflatac contact for the individual Declaration of Conformance (DoC) document of each product component for further compliance information.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Product availability

ServiceWidth (mm) / Length (m)
Coater1000/0

 Do you know our services?

 Components

 ‭(Hidden)‬ News

 ‭(Hidden)‬ Brochures

 ‭(Hidden)‬ Related materials