Product search



THERMAL TOP P 200-FSC / RR21 / HONEY GLASSINE 65FLG/RR21/036415788244425

Download as pdf

Date08.05.2019 SI
Sales CodeFLG/RR21/03
Product useProduct designed for general purpose topcoated direct thermal labels for retail, transport and logistics applications requiring removable adhesive.
Typical technical values
ProductA top and reverse side barrier coated thermal paper with a standard sensitivity produced totally without BPA-based chemistry. This face paper is made from FSC™-certified (mix credit) pulp.
Substance75g/m²ISO 536
Caliper74µmISO 534
Tensile strength MD4.70kN/mISO 1924/2min
Tensile strength CD2.30kN/mISO 1924/2min
Brightness93%ISO 2470/3
Imaging colourBlack
ScanningVisible red light (wavelength up to 650 nm).
DT printing speedDirect thermal printing speed up to 200 mm/s.
Optical densityDirect thermal print 1.20 (min)
PrintabilitySuitable for direct thermal, UV- and water-based flexography, UV-letterpress and UV-offset.
SustainabilityThe product is sold as FSC™ Mix Credit under UPM Raflatac's FSC certificate SGSCH-COC-004879.
TypeGeneral purpose removable adhesive.
CompositionRubber, water borne.
Tack5N/25mmFTM 9
Peel min2.0N/25mmFTM 290°
Peel max5.0g/25mmFTM 290°
ProductYellow transparent glassine backing paper.
Substance57g/m²ISO 536
Caliper51µmISO 534
Tensile strength MD6.2kN/mISO 1924
Tensile strength CD2.3kN/mISO 1924
Transparency49%DIN 53147
Total caliper137 µm
Minimum labelling temperature-10 °C
Service temperature-30 °C to 70 °C
Shelf lifeFrom date of manufacture: 12 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Product InformationDesigned for information labelling requiring good long term removability and good bar code scratch resistance to guarantee excellent scanning properties in retail, transport and logistics applications. Should not be exposed to direct sunlight or high temperatures for long periods of time and this product is not suitable for labelling of plasticised PVC. Pre-printing and varnish layers decrease print head heat energy conductivity into thermal layer, consequently it is recommended not to pre-print/varnish label area which is meant for direct thermal printing.
Approvals and certificationsFor food packaging applications, please contact your local sales representative for the individual Declaration of Conformance (DoC) document of each product component for further compliance information.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Product availability

ServiceWidth (mm) / Length (m)

 Do you know our services?


 ‭(Hidden)‬ News

 ‭(Hidden)‬ Brochures

 ‭(Hidden)‬ Related materials