Product search

 

 

THERMAL TOP P 200-FSC / RH9X / PROLINER PLUSFLG/RH9X/PPP6415788244388

Download as pdf

Date07.05.2019 SI
ProductTHERMAL TOP P 200-FSC / RH9X / PROLINER PLUS
Sales CodeFLG/RH9X/PPP
EAN6415788244388
Product useProduct designed for topcoated direct thermal labels especially in pre-packed food applications with good convertability, direct thermal printability and initial tack.
Typical technical values
FaceTHERMAL TOP P 200-FSC
ProductA top and reverse side barrier coated thermal paper with a standard sensitivity produced totally without BPA-based chemistry. This face paper is made from FSC™-certified (mix credit) pulp.
Substance75g/m²ISO 536
Caliper74µmISO 534
Tensile strength MD4.70kN/mISO 1924/2min
Tensile strength CD2.30kN/mISO 1924/2min
Brightness93%ISO 2470/3
Imaging colourBlack
ScanningVisible red light (wavelength up to 650 nm).
DT printing speedDirect thermal printing speed up to 200 mm/s.
Optical densityDirect thermal print 1.20 (min)
PrintabilitySuitable for direct thermal, UV- and water-based flexography, UV-letterpress and UV-offset.
SustainabilityThe product is sold as FSC™ Mix Credit under UPM Raflatac's FSC certificate SGSCH-COC-004879.
AdhesiveRH9X
TypeGeneral purpose permanent adhesive.
CompositionRubber, hotmelt.
Tack17N/25mmFTM 9
BackingProLiner Plus
ProductClear polypropylene backing material.
Substance27g/m²ISO 536
Caliper30µmISO 534
Tensile strength MD200.0N/mm²DIN 53455
Tensile strength CD180.0N/mm²DIN 53455
Performance
Total caliper118 µm
Minimum labelling temperature0 °C
Service temperature-40 °C to 60 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Information
Product InformationDesigned for wide range of industrial applications including pre-packed foodstuffs labelling where premium resistance to oil and water is required. Should be used when very good adhesion at low temperature is required. Very good adhesion to non-polar surfaces and pre-testing is required for adhesive surface printing. Pre-printing and varnish layers decrease print head heat energy conductivity into thermal layer, consequently it is recommended not to pre-print/varnish label area which is meant for direct thermal printing.
Approvals
Approvals and certificationsFor food packaging applications, please contact your local sales representative for the individual Declaration of Conformance (DoC) document of each product component for further compliance information.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Product availability

ServiceWidth (mm) / Length (m)
Mega2000/2000
Mega2000/4000
Mega2000/6000
Stock2000/0

 Do you know our services?

 Components

 ‭(Hidden)‬ News

 ‭(Hidden)‬ Brochures

 ‭(Hidden)‬ Related materials