Product search

 

 

LASER LOGISTICS PEFC / RPAL / KRAFT SPECIAL 55EUS/RPAL/666415788223284

Download as pdf

Date08.05.2019 SI
ProductLASER LOGISTICS PEFC / RPAL / KRAFT SPECIAL 55
Sales CodeEUS/RPAL/66
EAN6415788223284
Product useProduct designed for laser printed applications in logistics labelling where strong adhesion is required.
Typical technical values
FaceLASER LOGISTICS PEFC
ProductWoodfree machine finished paper.
Substance71g/m²ISO 536
Caliper91µmISO 534
Tensile strength MD5.5kN/mISO 1924/1
Tensile strength CD2.3kN/mISO 1924/1
Brightness93%ISO 2470/1
Roughness5.5µmISO 8791PPS 10
Opacity90%ISO 2471
CIE Whiteness150%ISO 11475
Stiffness MD0.35mNmISO/DP 2493
Stiffness CD0.12mNmISO/DP 2493
PrintabilitySuitable for laser and inkjet. Flexography, offset and screenprint. Please note that conventional printing can compromise inkjet and laser overprintability.
SustainabilityThe product is sold as 100% PEFC™ certified under UPM Raflatac's PEFC certificate CH11/1264.00.
AdhesiveRPAL
TypeExtra permanent for A4 and cut-size applications.
CompositionAcrylic, water borne.
Tack min14NFTM 9
Shear min2hFTM 8
BackingKRAFT SPECIAL 55
ProductWhite woodfree kraft backing paper.
Substance51g/m²ISO 536
Caliper54µmISO 534
Tensile strength MD4.7kN/mISO 1924
Tensile strength CD2.0kN/mISO 1924
Performance
Total caliper164 µm
Minimum labelling temperature5 °C
Service temperature-20 °C to 100 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Information
LimitationsAll 4-edges matrix stripping recommended or, as a minimum, slitting the web edges in converting is required with RPAL adhesive in order to minimize adhesive contamination during converting and laser printing.
Product InformationDesigned for A4 laminates in logistic end-uses where very good adhesion to different type of cardboards, corrugated boards and non-polar plastic surfaces is needed
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Product availability

ServiceWidth (mm) / Length (m)
Mega1320/3000
Stock1320/0

 Do you know our services?

 Components

 ‭(Hidden)‬ News

 ‭(Hidden)‬ Brochures

 ‭(Hidden)‬ Related materials