Product search

 

 

PET MATT SILVER TC 50 / RP37S / HD 70ZC/R37S/286415788232354

Download as pdf

Date07.05.2019 SI
ProductPET MATT SILVER TC 50 / RP37S / HD 70
Sales CodeZC/R37S/28
EAN6415788232354
Product useProduct designed for less demanding durables labelling applications that still need good adhesion on various surfaces and good print resistance against chemicals, UV-light, heat and moisture. This product is less prone to dusting than equivalent matt films.
Typical technical values
FacePET MATT SILVER TC 50
ProductSilver, matt top-coated polyester film.
Substance71g/m²DIN 53352
Caliper51µmDIN 53370
PrintabilitySuitable for flexography, screen and offset printing methods. Special inks designed for non-absorbent materials should be used. Thermal transfer possible with selected wax-resin and resin ribbons.
AdhesiveRP37S
TypeClear permanent adhesive.
CompositionAcrylic, water borne.
Tack12N/25mmFTM 9
Peel 90°9N/25mmFTM 2
BackingHD 70
ProductA white transparent glassine backing paper.
Substance60g/m²ISO 536
Caliper53µmISO 534
Tensile strength MD6.6kN/mISO 1924
Tensile strength CD2.5kN/mISO 1924
Transparency50%DIN 53147
Performance
Total caliper123 µm
Minimum labelling temperature5 °C
Service temperature-40 °C to 100 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Information
AdhesionDue to the fact that the adhesive needs a certain time to reach its final adhesion, we recommend waiting at least 24h (better 72h) after dispensing the label to the substrate before proceeding with any performance tests. Test Conditions: 23°C and 50% RH. FTM1: 180° Peel Adhesion (300mm/min) with 72h dwell time.
Surface[N/25mm]
Stainless Steel18
ABS9
Polycarbonate15
Polypropylene8
HDPE5
PA610
PA6 + GF308
Polyester10
Lacquered panel8
Powder coated panel6
Chemical resistanceTest Conditions: Dwell time on glass plate: 24 h; 23°C 50% RH Immersion in chemical: 4 h; 23°C 50% RH
ChemicalVisual AppearanceEdge Penetration (mm)
Brake Fluidno change0
Engine Oilno change0
Dieselno change0
Distilled Waterno change0
Dish Washing Agentno change0
Bleachno change0
Thermal Transfer Ribbons(included in File MH26760) Armor: AXR 7+; Dainippon TR4070; Ricoh B110CR
Approvals
UL and CSA complianceUL recognized acc. to UL969 and CSA recognized acc. to C22.2 No. 0.15. File-No.: MH26760
ULFile MH26760: Additional conditions: DL - Occasional exposure to Laundry Detergents F1 - Occasional exposure to Fuel Oil No. 1 G - Occasional exposure to Gasoline splashing O - Occasional exposure to Lubricating Oil
Application SurfaceMax Temp [°C]Min Temp [°C]Indoor UseOutdoor UseAdditional conditions
Aluminium (AL)80-40xxDL, F1, O
Stainless steel (SS)80-40xxDL, F1, O
Acrylonitrile butadiene styrene (ABS)80-40xxDL, G, O
Polyethylene (PE)80-10x-DL, F1, O
Polystyrene (PS)80-40xxDL
Typical valuesThe listed technical data are typical values and give indications about the performance of the material only. They are not intended for specification purpose.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Product availability

ServiceWidth (mm) / Length (m)
Small roll1000/500
Stock1000/0
Stock1000/500

 Do you know our services?

 Components

 ‭(Hidden)‬ News

 ‭(Hidden)‬ Brochures

 ‭(Hidden)‬ Related materials