Product search



PET WHITE TC 50 / RP37S / HD 70AJ/R37S/286415788231128

Download as pdf

Date06.05.2019 SI
ProductPET WHITE TC 50 / RP37S / HD 70
Sales CodeAJ/R37S/28
Product useProduct designed for less demanding durables labelling applications that still need good adhesion on various surfaces and print resistance against chemicals, UV-light, heat and moisture.
Typical technical values
ProductWhite, matt, top-coated polyester film.
Substance55g/m²DIN 53352
Caliper50µmDIN 53370
Opacity92%ISO 2471
Gloss13%ASTM D2457
PrintabilitySuitable for flexography, screen and offset printing methods. Special inks designed for non-absorbent materials should be used. Thermal transfer is possible with selected wax, wax-resin and resin ribbons.
TypeClear permanent adhesive.
CompositionAcrylic, water borne.
Tack12N/25mmFTM 9
Peel 90°9N/25mmFTM 2
BackingHD 70
ProductA white transparent glassine backing paper.
Substance60g/m²ISO 536
Caliper53µmISO 534
Tensile strength MD6.6kN/mISO 1924
Tensile strength CD2.5kN/mISO 1924
Transparency50%DIN 53147
Total caliper122 µm
Minimum labelling temperature5 °C
Service temperature-40 °C to 100 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
AdhesionDue to the fact that the adhesive needs a certain time to reach its final adhesion, we recommend waiting at least 24h (better 72h) after dispensing the label to the substrate before proceeding with any performance tests. Test Conditions: 23°C and 50% rH. FTM1: 180° Peel Adhesion (300 mm/min) with 72 h dwell time.
Stainless Steel18
PA6 + GF308
Lacquered panel8
Powder coated panel6
Chemical resistanceTest Conditions: Dwell time on glass plate: 24 h; 23°C 50% RH Immersion in chemical: 4 h; 23°C 50% RH
ChemicalVisual AppearanceEdge Penetration (mm)
Brake Fluidno change0
Engine Oilno change0
Dieselno change0
Distilled Waterno change0
Dish Washing Agentno change0
Bleachno change0
Thermal Transfer Ribbons(included in File MH26760): Armor AXR 7+; ITW B324 (not suitable for outdoor use or additional conditions) Sony Chemicals 5075
UL and CSA complianceUL recognized acc. to UL969 File-No.: MH26760
ULFile MH26760: Additional conditions: D - Occasional exposure to Detergents F1 - Occasional exposure to Fuel Oil No. 1 F2 - Occasional exposure to Fuel Oil No. 2 G - Occasional exposure to Gasoline splashing O - Occasional exposure to Lubricating Oil
Application SurfaceMax Temp [°C]Min Temp [°C]Indoor UseOutdoor UseAdditional conditions
Alkyd paint (AK PT)80-40xxD, O, F1, F2, G
Aluminium (AL)80-40xxD, O, F1, F2, G
Stainless steel (SS)80-40xxD, O, F1, F2, G
Polycarbonate (PC)80-40x--
Acrylonitrile butadiene styrene (ABS)80-40xxD, O, F1, F2, G
Polyethylene (PE)80-23x--
Polypropylene (PP)80-23x--
Polystyrene (PS)80-40xxD, O, F1, F2, G
Typical valuesThe listed technical data are typical values and give indications about the performance of the material only. They are not intended for specification purpose.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Product availability

ServiceWidth (mm) / Length (m)
Small roll1000/500

 Do you know our services?


 ‭(Hidden)‬ News

 ‭(Hidden)‬ Brochures

 ‭(Hidden)‬ Related materials