UPM Raflatac North America > Labelstock Products > Technical Product Information
Technical Product Information
Sales code: LS53N
|
| Last updated 5/2012 |
| |
| Caliper: | 5.4 mil |
| Substance weight: | 87 lbs./ream |
Face |
| 40# Jetlite, Lignin-free, machine finished paper. Multifunctional information labeling for ink-jets, lasers and photocopiers. Flexible face material, optimal for hospital and laboratory applications. |
| Substance weight | 38 lbs./ream (25" x 38") | ISO536 |
| Caliper | 2.6 mil | ISO534 |
| Tensile strength MD | 19 lbf/in. | ISO1924 |
| Tensile strength CD | 11 lbf/in. | ISO1924 |
| Roughness | 4.5 microns PPS10 | ISO8791-4 |
| Opacity | 88% | ISO2471 |
Adhesive |
| RP54, Modified acrylic dispersion. Permanent adhesive designed for all roll-to-sheet labelstock in a wide range of applications. Very good heat resistance, which enables trouble-free performance in different laser printers. Good adhesion to corrugated board. |
| Tack min | 14 N FTM 9 | |
| Shear min | 5.0 h FTM 8 | |
| PE-looptack min | 10 N modified FTM 9 | |
| Labeling temperature min | 32 °F | |
| Service temperature range | -4 °F ... 248 °F | |
| |
| Shelf life: From the date of manufacture 4 years at 68 °F and RH 50%. |
Liner |
| 2.1 mil White Kraft, White kraft liner. For labelstock where a thin liner is needed, especially for sheeted labelstock and other VIP labeling. |
| Substance weight | 31 lbs./ream (24" x 36") | ISO536 |
| Caliper | 2.1 mil | ISO534 |
| Tensile strength MD | 27 lbf/in. | ISO1924 |
| Tensile strength CD | 11 lbf/in. | ISO1924 |
| The above are typical technical values and are given in good faith based upon our most up to date knowledge and experience. As the products are used outside our control we cannot take responsibility for any damage which may be caused using the product. |
Previous Page
