UPM Raflatac North America > Labelstock Products > Technical Product Information
Technical Product Information
Sales code: TT60R
|
| Last updated 5/2012 |
| |
| Caliper: | 5.8 mil |
| Substance weight: | 104 lbs./ream (25" x 38") |
Face |
| Transfer Premium Lite, Matte-coated, lignin-free label paper. An ultra-smooth, coated face material for excellent thermal transfer printing and flexography. |
| Substance weight | 44 lbs./ream (25" x 38") | ISO536 |
| Caliper | 2.85 mil | ISO534 |
| Tensile strength MD | 23 lbf/in. | ISO1924 |
| Tensile strength CD | 17 lbf/in. | ISO1924 |
| Roughness | 2.0 microns PPS10 | ISO8791-4 |
| Opacity | 87% | ISO2471 |
| Brightness | 86.5% | ISO2470 |
Adhesive |
| RP48AT, Modified acrylic dispersion all-temperature adhesive. Should be used when very good adhesion at low temperatures is required. Adhesion to non-polar surfaces is very good. Remains adherent at low temperatures. |
| Tack min | 7 N FTM 9 | |
| Shear min | 3.0 h FTM 8 | |
| PE-looptack min | 7 N modified FTM 9 | |
| Labeling temperature min | -20 °F | |
| Service temperature range | -65 °F ... 200 °F | |
| |
| Limited heat resistance. Becomes more aggressive as the temperature drops, especially below 32 °F. Not suitable for labeling curved surfaces. Limited adhesion to moist surfaces. |
Liner |
| 40# White Kraft, White kraft liner. For roll-to-roll applications and photocell dispensing. |
| Substance weight | 40 lbs./ream (24" x 36") | ISO536 |
| Caliper | 2.4 mil | ISO534 |
| Tensile strength MD | 40 lbf/in. | ISO1924 |
| Tear strength CD | 18 lbf/in. | ISO1924 |
| Opacity | 61% | ISO2469 |
| The above are typical technical values and are given in good faith based upon our most up to date knowledge and experience. As the products are used outside our control we cannot take responsibility for any damage which may be caused using the product. |
Previous Page
