UPM Raflatac North America > Labelstock Products > Technical Product Information
Technical Product Information
Sales code: PL67X
|
| Last updated 5/2012 |
| |
| Caliper: | 5.7 mil. |
| Substance weight: | 113 lbs./ream (25" x 38") |
Face |
| 54# Raflacoat, White, lignin-free, on-machine coated, super calendered semi-gloss paper. Multipurpose label paper for high quality, multicolor labels requiring good print definition and fine detail. |
| Substance weight | 54 lbs./ream | ISO536 |
| Caliper | 2.7 mil | ISO534 |
| Tensile strength MD | 33 lbf/in. | ISO1924 |
| Tensile strength CD | 16 lbf/in. | ISO1924 |
| Roughness | 1.0 microns PPS10 | ISO8791-4 |
| Opacity | 89% | ISO2471 |
| Brightness | 90% | ISO2470 |
| Gloss | 64% | Hunter 75° |
Adhesive |
| RH01, Rubber-resin hotmelt. Permanent adhesive for use in cold environments, particularly if the application surface is moist or if very high initial adhesion is required. Good low temperature performance once labeled. Very good adhesion to non-polar surfaces. |
| Tack min | 14 N FTM 9 | |
| Shear min | 5.0 h FTM 8 | |
| PE-looptack min | 10 N modified FTM 9 | |
| Labeling temperature min | 23 °F | |
| Service temperature range | -40 °F ... 122 °F | |
| |
| Not suitable for labeling of plasticized PVC. Shelf life: From the date of manufacture 2 years at 68 °F and RH 50%. |
Liner |
| 40# White Kraft, White kraft liner. For roll-to-roll applications and photocell dispensing. |
| Substance weight | 40 lbs./ream (24" x 36") | ISO536 |
| Caliper | 2.4 mil | ISO534 |
| Tensile strength MD | 40 lbf/in. | ISO1924 |
| Tear strength CD | 18 lbf/in. | ISO1924 |
| Opacity | 61% | ISO2469 |
| The above are typical technical values and are given in good faith based upon our most up to date knowledge and experience. As the products are used outside our control we cannot take responsibility for any damage which may be caused using the product. |
Previous Page
