UPM Raflatac North America > Technical Product Information
Technical Product Information
Sales code: SY173H
|
| Last updated 6/2009 |
| |
| Caliper: | 5.0 mil. |
| Substance weight: | 100 lbs./ream (25 x 38") |
Face |
| PE White TC 85, White, glossy, top-coated polyethylene film. For prime labeling applications where resistance against water, oil and/or chemicals is important. For labeling toiletries and cosmetics. |
| Substance weight | 57 lbs./ream (25" x 38") | DIN53352 |
| Caliper | 3.3 mil. | DIN53370 |
| Elongation MD (min) | 200% | DIN53455 |
| Gloss | 75% | DIN67530/1 |
Adhesive |
| RP37, Clear permanent acrylic dispersion adhesive. Specially designed for film face materials. Excellent clarity, UV-stability and water resistance. Good adhesion properties and heat resistance. |
| Tack min | 9 N FTM 9 | |
| Shear min | 10.0 h FTM 8 | |
| PE-looptack min | 5 N modified FTM 9 | |
| Labeling temperature min | 50°F | |
| Service temperature range | - 4°F ... 212°F | |
| |
| Limited adhesion at low temperatures. The highest end-use temperature must be separately checked together with the face material. Shelf life : From the date of manufacture 2 years at 68°F and RH 50%. |
Liner |
| 1.2 mil. PET, Clear polyester film liner. Specially designed for use with clear film face materials or applications requiring excellent clarity. |
| Substance weight | 26 lbs./ream (24" x 36") | DIN53352 |
| Caliper | 1.2 mil. | DIN53370 |
| Transparency | 100% | ISO2469 |
| The above are typical technical values and are given in good faith based upon our most up to date knowledge and experience. As the products are used outside our control we cannot take responsibility for any damage which may be caused using the product. |
Previous Page
