UPM Raflatac North America > Labelstock Products > Technical Product Information
Technical Product Information
Sales code: DT32S
|
| Last updated 5/2012 |
| |
| Caliper: | 6.1 mil |
| Substance weight: | 113 lbs./ream (25" x 38") |
Face |
| Direct Thermal Top, Top barrier-coated, chemi-thermal paper with standard sensitivity. For universal VIP labeling requiring good environmental resistance of the printed image. For retail use. |
| Substance weight | 53 lbs./ream (25" x 38") | ISO536 |
| Caliper | 3.2 mil | ISO534 |
| Tensile strength MD | 30 lbf/in. | ISO1924 |
| Tensile strength CD | 15 lbf/in. | ISO1924 |
| Roughness | 1.0 microns PPS10 | ISO8791-4 |
| Opacity | 91% | ISO2471 |
| Brightness | 80% | ISO2470 |
| Density | 1.33 | ODU |
| Scanning | Visible red light | |
Adhesive |
| RH09, Rubber-resin hotmelt. Permanent adhesive recommended for applications where the surface is moist or if very high initial adhesion is required. Good low temperature performance once labeled. Very good adhesion to non-polar surfaces. |
| Tack min | 14 N FTM 9 | |
| Shear min | 6.0 h FTM 8 | |
| PE-looptack min | 10 N modified FTM 9 | |
| Labeling temperature min | 32 °F | |
| Service temperature range | -40 °F.... 122 °F | |
| |
| Not suitable for labeling of plasticized PVC. Shelf life: From the date of manufacture 2 years at 68 °F and RH 50%. |
Liner |
| 40# White Kraft, White kraft liner. For roll stock applications and photocell dispensing. |
| Substance weight | 40 lbs./ream (24" x 36") | ISO536 |
| Caliper | 2.4 mil | ISO534 |
| Tensile strength MD | 40 lbf/in. | ISO1924 |
| Tear strength CD | 18 lbf/in. | ISO1924 |
| Opacity | 61% | ISO2469 |
| The above are typical technical values and are given in good faith based upon our most up to date knowledge and experience. As the products are used outside our control we cannot take responsibility for any damage which may be caused using the product. |
Previous Page
